{"id":38,"date":"2008-12-24T01:23:42","date_gmt":"2008-12-24T08:23:42","guid":{"rendered":"http:\/\/www.hd4pc.com\/techblog\/2008\/12\/24\/downconverting-high-definition-to-dvd\/"},"modified":"2008-12-24T01:23:42","modified_gmt":"2008-12-24T08:23:42","slug":"downconverting-high-definition-to-dvd","status":"publish","type":"post","link":"https:\/\/www.hd4pc.com\/techblog\/2008\/12\/24\/downconverting-high-definition-to-dvd\/","title":{"rendered":"Downconverting High Definition to DVD"},"content":{"rendered":"

I get lots of inquiries about making regular DVDs from High Definition material.\u00c2\u00a0 Hopefully from\u00c2\u00a0now on I can respond to those questions\u00c2\u00a0with a\u00c2\u00a0link to this post.\u00c2\u00a0 There are two aspects of the downconvert process that cause quality problems if not handled correctly.\u00c2\u00a0 First is the interlacing problem.\u00c2\u00a0 Even if both HD and SD were lower field first, there would still be issues, but the fact that HD and HDV are upper field first at 1080i, makes the potential problems even more obvious if not processed correctly.\u00c2\u00a0 Scaling normally averages adjacent pixels, but in interlaced video, each alternating pixel line represents a slightly different slice of time, so scaling a whole frame without accounting for this difference will never lead to good results.\u00c2\u00a0 One application that gives you the level of the control you need, to ensure that this process is handled correctly, is Adobe After Effects<\/a>.\u00c2\u00a0 By properly interpreting the source footage, and enabling the field rendering option in the render que, you can ensure that smooth motion in your video is maintained through the down conversion process.\u00c2\u00a0 Essentially 1080i30 footage is really 60 frames of 540p footage, that needs to be scaled to 240p for 60 discrete images, and then reinterlaced to 480i30 for SD viewing on DVD.
\n
\nThe way you do this, for a 1080i project is to export an interlaced master HD file at your native resolution, usually 1440×1080 or 1920×1080 for interlaced HD footage. (Although 1280x720p60 would also work, with the interlaced interpretation disabled in AE)\u00c2\u00a0 You import that master export into AE, and interpret the footage as upper field first. (CTRL+F)
\nAdd that footage to a Widescreen DV timeline. (Usually widescreen unless you want to burn in letterboxing, which I don’t recommend since we are going for maximum quality here)\u00c2\u00a0 You then want to scale the footage to the width of the comp. (CTRL+ALT+SHIFT+H, or Right-click->Transform->Fit to Comp Width)\u00c2\u00a0 It should be about 45% for NTSC widescreen.\u00c2\u00a0 You can optionally add a sharpen effect at around 20, but it takes longer to render, and I never see a real difference in clarity.\u00c2\u00a0 Then add to the render que (CTRL+SHIFT+\/).\u00c2\u00a0 Render directly to MPEG2-DVD, or Uncompressed AVI for third party encoding, but that should be unnecessary in most cases.\u00c2\u00a0 For the encode settings, I use NTSC, 29.97fps, lower-field-first, widescreen, at 7Mb CBR.\u00c2\u00a0 I use multiplexed PCM audio for short clips, but for longer clips, use Encore to encode the audio to AC3 separately, so you can skip the multiplexer.\u00c2\u00a0 Once that is setup, the important thing to do is to enable the field rendering option in the render settings dialog box.\u00c2\u00a0 It is midway down the left side, depending on your version, and you need to change it from “None” to “Lower Field First” in the drop down.\u00c2\u00a0 This is the key to getting AE to process the interlacing with the proper temporal context for any given pixel.\u00c2\u00a0 That should be everything you need to downconvert interlaced HD footage to regular DVD frame size properly.<\/p>\n

The\u00c2\u00a0second possible complication is brought to you by the fact that lots of HD footage is now being shot and edited at 24 progressive frames per second.\u00c2\u00a0\u00c2\u00a0 One solution is to make 24 frame progressive DVDs, which can work if you do everything perfectly.\u00c2\u00a0 I have yet to see this done properly, but Encore is adding more 24p support with every version.\u00c2\u00a0 I believe you can import and burn 24fps MPEG2 files to regular SD-DVDs in Encore, even though there are no presets for it.\u00c2\u00a0 I have yet to see a fool-proof flawless system for doing this, so I still add the pulldown myself for maximum compatibility and stability.\u00c2\u00a0 To do this, you once again need to use AE to convert a master HD export of your finished piece.\u00c2\u00a0 Import it into AE and leave it progressive with no interlacing interpretation, but reinterpret to 23.976fps if it is true 24p.\u00c2\u00a0 Insert the footage into a DV widescreen 23.976 comp and scale it, as described above.\u00c2\u00a0 Add to render que and use the same encoder settings as above.\u00c2\u00a0 In the render settings dialog, you still want to set the Field Renderer to Lower-Field-First, but you also want to add pulldown, in the dropdown menu directly below.\u00c2\u00a0 You will want to set that to the last option which is “WWSSW”, although honestly any of those would work fine for DVD.\u00c2\u00a0 You should see the output framerate change to 29.97 when you select a pulldown option, and you should be all set to render.\u00c2\u00a0 Hopefully this points people in the right direction in regards to getting the highest possible image quality to DVD from your high definition video projects.<\/p>\n

Everything listed above is geared toward NTSC based production.\u00c2\u00a0 The first set of steps will also work for PAL, going from 1080i50 to 576i50, but your output render should be Upper-Field-First.\u00c2\u00a0 There is no pulldown option to go from 24p to PAL.\u00c2\u00a0 It can be done instead by increasing the footage framerate, but this causes the audio to need to be sped up by 4.2%.\u00c2\u00a0 Usually the speed change is not perceivable, but the final product will be a shorter duration than the original.\u00c2\u00a0 It also is not possible to generate any true PAL\u00c2\u00a0interlacing information from 24p footage with this method.<\/p>\n","protected":false},"excerpt":{"rendered":"

I get lots of inquiries about making regular DVDs from High Definition material.\u00c2\u00a0 Hopefully from\u00c2\u00a0now on I can respond to those questions\u00c2\u00a0with a\u00c2\u00a0link to this post.\u00c2\u00a0 There are two aspects of the downconvert process that cause quality problems if not handled correctly.\u00c2\u00a0 First is the interlacing problem.\u00c2\u00a0 Even if both HD and SD were lower […]<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[29],"tags":[43,24,30],"_links":{"self":[{"href":"https:\/\/www.hd4pc.com\/techblog\/wp-json\/wp\/v2\/posts\/38"}],"collection":[{"href":"https:\/\/www.hd4pc.com\/techblog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.hd4pc.com\/techblog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.hd4pc.com\/techblog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.hd4pc.com\/techblog\/wp-json\/wp\/v2\/comments?post=38"}],"version-history":[{"count":0,"href":"https:\/\/www.hd4pc.com\/techblog\/wp-json\/wp\/v2\/posts\/38\/revisions"}],"wp:attachment":[{"href":"https:\/\/www.hd4pc.com\/techblog\/wp-json\/wp\/v2\/media?parent=38"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.hd4pc.com\/techblog\/wp-json\/wp\/v2\/categories?post=38"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.hd4pc.com\/techblog\/wp-json\/wp\/v2\/tags?post=38"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}